Nortel Networks P0908546 User Manual
P0908546 Issue 01
Enterprise Edge ATA 2 User Guide
Data Communication
This section supplies additional information for using Enterprise Edge Analog
Terminal Adapter 2 with data communication devices.
Terminal Adapter 2 with data communication devices.
Set Tones to OFF
Enterprise Edge ATA 2 must have tones OFF so tones do not interfere with data
transmissions.
transmissions.
The following progress tones are not heard when Enterprise Edge ATA 2 is in the
tones OFF mode:
tones OFF mode:
•
Held Line Reminder
•
Call Waiting
•
Ring Again
To turn tones OFF:
Lift the handset and press ˚£°‚·.
Auto-answer Modems and Answering Machines
Enterprise Edge ATA 2 can be programmed to ring directly on one external line. It
can also be designated as the Night Set to answer calls after hours. To assign an
external line to ring at the digital telephone, contact your Installer or System
Administrator.
can also be designated as the Night Set to answer calls after hours. To assign an
external line to ring at the digital telephone, contact your Installer or System
Administrator.
Modem and FAX Transmission Compatibility
Enterprise Edge ATA 2 is compatible with all commercial FAX and modem
protocols. When connected to Enterprise Edge ATA 2, the Enterprise Edge server
supports data transmission rates up to and including 28.8 kbit/s.
protocols. When connected to Enterprise Edge ATA 2, the Enterprise Edge server
supports data transmission rates up to and including 28.8 kbit/s.
Note: The maximum data transmission rate is subject to the quality of the end-to-
end channel and cannot be guaranteed.