Nortel Networks P0908546 User Manual

P0908546 Issue 01

Enterprise Edge ATA 2 User Guide

If you are having trouble, check the following before calling a repair person:

1. Make sure the data parameters (parity, baud) are set correctly.

2. Make sure Enterprise Edge Analog Terminal Adapter 2 is in the tones OFF 

mode.

3. Make sure you are dialing out on the proper line. The proper line is either an 

intercom or external line. See 

 on page 6 of the Feature List. To 

change your prime line, see your System Administrator.

4. Substitute a single line telephone for your data communication device. If you 

receive a dial tone on the single line telephone, the problem can be with the 
data communication device.