Nortel Networks 1002rp User Manual
October 2006
Preparing for installation
1002rp Server Hardware Installation
41
To remove the server cover
1 Remove the front bezel (see page 40).
2 Loosen the three thumbscrews at the rear of the top cover.
3 Remove the server cover by pulling the cover toward the rear of the
chassis, and then lifting it up and off.
4 Clip the lead from your ESD wrist strap to an unpainted metal section of
the chassis.
What’s next?
.
DANGER
Risk of electric shock
High current inside the chassis can cause severe injury.
.
CAUTION
Risk of equipment damage
Take precautions to protect internal components. Electrostatic
discharge (ESD) can render boards damaged or unusable. Wear
an ESD wrist strap.
discharge (ESD) can render boards damaged or unusable. Wear
an ESD wrist strap.