Nortel Networks 1002rp User Manual
Preparing for installation
Standard 1.07
42
CallPilot
Inspecting the server interior
Introduction
You should perform a visual inspection for loose components, foreign
matter, or shipping damage inside the server.
matter, or shipping damage inside the server.
To inspect the server interior
1 Carefully check all the cards to ensure they are fully seated on the
baseboard.
2 Check for any loose wires or foreign objects, such as loose screws,
inside the chassis.
3 Review the slot locations (see “Slot assignments” on page 21).
4 Do one of the following:
.
CAUTION
Risk of equipment damage
When working with interior components, use an ESD wrist
strap to protect static-sensitive components.
strap to protect static-sensitive components.
IF THEN
you observe any damage
contact your Nortel technical
support representative.
support representative.
components have become
loose
loose
secure them.
Refer to the procedures in the
Installation and Configuration Task
List (555-7101-210).
Refer to the procedures in the
Installation and Configuration Task
List (555-7101-210).