Nortel Networks 1002rp User Manual
1002rp Server Hardware Installation
79
A p p e n d i x A
EMC emission level protection for
the 1002rp Server
the 1002rp Server
To lower the EMC emission level, ferrite cores are installed with one loop
(see diagram below) on the following external cables:
(see diagram below) on the following external cables:
Ferrite Core (TDK and part number ZCAT3035-1330) — for the triple
DS30X I/O cable (Nortel and part number NTRH2014), at each end of
the cable
DS30X I/O cable (Nortel and part number NTRH2014), at each end of
the cable
Ferrite Core (TDK and part number ZCAT1325-0530) — for the modem
power supply cable, at each end of the cable
power supply cable, at each end of the cable
Ferrite Core (Fair Rite and part number 0431164181) — for the Trenton
combined keyboard and mouse Y connector cable, at the server end of
the cable
combined keyboard and mouse Y connector cable, at the server end of
the cable
Ferrite Core (part number WE 742 7111) — for Ethernet port cat5 UTP
cable, at the server end of the cable
cable, at the server end of the cable
.
CAUTION
Risk of equipment damage
The ferrite cores are preinstalled on these customer
provided cables. It is not the customer's responsibility to
attach these ferrite cores to these cables. However, the
customer should ensure that these ferrites are in place to
keep the EMC emission levels low.
provided cables. It is not the customer's responsibility to
attach these ferrite cores to these cables. However, the
customer should ensure that these ferrites are in place to
keep the EMC emission levels low.