Nortel Networks 201i User Manual
Installing the 201i server in the Succession 1000 system
Standard 1.07
106
CallPilot
2 Remove the inside front cover plate as follows:
a. Use a screwdriver to loosen each screw on the top of the inside front
cover plate by three turns.
b. Apply pressure and slide the inside front cover plate upward
to the left
until the screw holes are aligned with the screw heads.
c. Pull the inside front cover plate away from the Media Gateway or
Media Gateway Expansion.
What’s next?
ATTENTION
Do not remove the screws.
G101621
A
C
B