Nortel Networks 201i User Manual

About the 201i server

Standard 1.07

32

CallPilot

MPC-8 card
The MPC-8 card looks like a Type II PC card, and supports the multimedia 
telephony services on the 201i server. Four specially-designed card slots are 
available for the MPC-8. All are located on the 201i server faceplate.

SCSI connections
The SCSI connection is the only permanent faceplate connection. A low-
profile right-angle connector on the SCSI cable allows the cable to be 
attached with the cabinet covers on. For more information about how the 
201i server and SCSI device connections are achieved, see: 

„

large Meridian 1 systems (for example, Option 51C): “Installing the 
SCSI cables for Meridian 1” on page 65.

„

Option 11C or Option 11C Mini: “Installing the NTRH3502 SCSI cable 
for Option 11C Mini” on page 86.

„

Succession 1000: “Installing the NTRH3502 SCSI cable for 
Succession 1000” on page 110.

CD-ROM drive (NTRH9105)
An external CD-ROM drive is used to install and upgrade the server. The 
drive connects to the server with an intermediate SCSI cable that connects to 
the SCSI connector on the faceplate.

Because the CD-ROM drive is an external device, it requires an AC power 
source.

Set the SCSI ID for the CD-ROM drive to 3. If you are connecting more 
than one SCSI device to the server (such as a tape drive), you must daisy 
chain those devices.

You cannot insert MPC-8 cards in Type II PC card slots, 
or Type II PC cards into MPC-8 card slots. They are not 
compatible.