Nortel Networks 201i User Manual

November 2006

About the 201i server

201i Server Hardware Installation

33

Note: The CD-ROM drive is not hot-pluggable. You must power off the 
server to connect or disconnect the drive.

Tape drive (NTRH9038)
An external SCSI tape drive is used to back up and restore data. The device 
connects to the server by an intermediate SCSI cable that connects to the 
SCSI connector on the faceplate.

Since the tape drive is an external device, it requires an AC power source.

Set the SCSI ID for the tape drive to 5. If you are connecting more than one 
SCSI device to the server (such as a CD-ROM drive), you must daisy chain 
those devices.

Note: The tape drive is not hot-pluggable. You must power off the server to 
connect or disconnect the drive.

Modem
An external modem provides remote access to the 201i server. The modem 
connects to the RS-232 COM1 connector on the multi I/O cable. 

Since the modem is an external device, it requires its own AC power source.

The supported modem is the 56 Kbps modem (NTRH9078).

10Base-T Ethernet hub
The 10Base-T Ethernet hub provides the ELAN connection between the 
201i server and the Meridian 1 switch or Succession 1000 system.

Since the hub is an external device, it requires an AC power source.

„

15 in. monitor: NTRH9011 or N0038380 LCD monitor

Since the monitor is an external device, it requires an AC power source.

„

Keyboard: NTRH9013

„

Mouse: NTRH9014