Nortel Networks 201i User Manual

November 2006

Installing the 201i server in an Option 11C or Option 11C Mini

201i Server Hardware Installation

81

1 Attach the bracket assembly and cable as follows:

a. Below the card cage, temporarily remove the hardware that secures 

cable connections to the Option 11C.

b. Temporarily remove any cabling that may interfere with the 

installation of the intermediate SCSI cable bracket assembly.

c. Remove the two screws on the right side of the Option 11C I/O panel.

d. Attach the intermediate SCSI cable bracket assembly, using the 

screws that were removed previously, so that the SCSI connector 
appears on the right side of the Option 11C cabinet.

You must power off the 201i server before connecting or 
disconnecting SCSI cables.

Before you disconnect the cabling, take the 
telephony equipment services associated with the 
cabling out of service.