Nortel Networks 703t User Manual

October 2006

Preinstallation requirements

703t Server Hardware Installation

43

When you are satisfied that the server was not damaged during shipment, 
reinstall the side cover.

1 Align the right edge of the server side cover with the inside ledge at the 

front of the server. 

2 Ensure that the cover lays flat along the side of the server.

3 Insert the tabs along the top and bottom edges of the server side cover 

inside the slots along the top and bottom of the server.

4 Push the cover towards the front of the server until the tabs firmly 

engage in the chassis. 

Note: When correctly engaged, the cover clicks into place.

5 Tighten the two thumbscrews on the back of the server.

Ensure that there are no tools or loose parts inside the server 
chassis before replacing the side cover.