Nortel Networks 4050 User Manual

Chapter 5 Configuring groups and profiles 201

Nortel Secure Network Access Switch 4050 User Guide

 

To create and configure a client filter, use the following command:

/cfg/domain 1/aaa/filter <filter ID>

where 

 is an integer in the range 1 to 63 that uniquely identifies the 

filter in the Nortel SNAS 4050 domain.

When you first create the filter, you must enter the filter ID. After you have 
created the filter, you can use either the ID or the name to access the filter for 
configuration.

When you first create the filter, you are prompted to enter the client filter name. 

The Client Filter menu displays.

Note: If you ran the quick setup wizard during initial setup, two client 
filters have been created: 

tg_passed

 (filter ID = 1) and 

tg_failed

 

(filter ID = 2).