Nortel Networks 4050 User Manual

Chapter 5 Configuring groups and profiles 203

Nortel Secure Network Access Switch 4050 User Guide

 

 shows sample output for the 

<filter ID> 

command and commands on the Client Filter menu.

Client Filter menu commands

To create and configure an extended profile, use the following command:

|group name>/extend 

[<profile ID>]

where 

 is an integer in the range 1 to 63 that uniquely identifies the 

profile in the group. If you do not enter the profile ID as part of the command, you 
are prompted to do so.

When you first create the extended profile, you must enter the profile ID. After 
you have created the extended profile, you can use either the profile ID or the 
name of the associated client filter to access the extended profile for configuration.

>> Main# /cfg/domain 1/AAA/filter 3

Creating Client Filter 3

Filter name: branch_pass

----------------------------------------------------------

[Client Filter 3 Menu]

name

- Set filter name

tg

- TunnelGuard checks passed

comment

-Set comment

del

- Remove client filter

>> Client Filter 3# tg

Current value: ignore

TunnelGuard passed (true/false/ignore): true

>> Client Filter 3#