Nortel Networks 4050 User Manual

Chapter 6 Configuring authentication 281

Nortel Secure Network Access Switch 4050 User Guide

 

Click Apply.

The new RADIUS server is automatically assigned a unique index number, 
and appears in the RADIUS Server Table.

Click Apply on the toolbar to send the current changes to the Nortel 
SNAS 4050. Click Commit on the toolbar to save the changes permanently.

To adjust the order in which RADIUS servers are used, perform the following 
steps:

Select the Secure Access Domain > domain > AAA > Authentication > 
radius > Radius Servers tab.

The RADIUS Servers screen appears (see 

).

Select an RADIUS server entry from the RADIUS Server Table.

Use the up and down arrows to reposition the selected entry.

Click Apply on the toolbar to accept the new order, and adjust index numbers 
for the RADIUS servers accordingly. Click Commit on the toolbar to save the 
changes permanently.

To remove an existing RADIUS server from the RADIUS Server Table, perform 
the following steps:

Select the Secure Access Domain > domain > AAA > Authentication > 
radius > Radius Servers tab.

Port

Specifies the port number configured for this server to use 
on the RADIUS server. The default is 1812.

Secret

Specifies a unique shared secret configured on the 
RADIUS server that authenticates the Nortel SNAS 4050 
to the RADIUS server.

Add a Radius Server fields (continued)