Nortel Networks 4050 User Manual
282 Chapter 6 Configuring authentication
320818-A
The RADIUS Servers screen appears (see
).
2
Select an RADIUS server entry from the RADIUS Server Table.
3
Click Delete.
A confirmation dialog appears.
4
Click Yes.
The RADIUS server is removed from the RADIUS Server Table.
5
Click Apply on the toolbar to accept the new order, and adjust index numbers
for the RADIUS servers accordingly. Click Commit on the toolbar to save the
changes permanently.
for the RADIUS servers accordingly. Click Commit on the toolbar to save the
changes permanently.
Next steps
1
Configure additional authentication methods, if desired (see
or
2
Set the authentication order (see
).
3
Commit the changes (see
Configuring LDAP authentication using the SREM
To configure the Nortel SNAS 4050 to use LDAP authentication, perform the
following steps:
following steps:
1
Add the LDAP method to the domain and specify the LDAP server (see
2
Modify the LDAP configuration settings, if desired (see
).
3
Add extra LDAP servers, for redundancy, if desired (see
4
).