Nortel Networks 4050 User Manual

Chapter 10 Configuring system settings 465

Nortel Secure Network Access Switch 4050 User Guide

 

To configure basic TCP/IP properties for a particular Nortel SNAS 4050 device in 
the cluster, use the following command:

/cfg/sys/host <host ID>

where 

 is an integer automatically assigned to the host when you 

perform initial setup on the Nortel SNAS 4050 device.

The 

/cfg/sys/host <host ID>

 command also allows you to halt, reboot, or 

delete the specified Nortel SNAS 4050 device.

The Cluster Host menu displays.

accesslist

Accesses the Access List menu, in order to control 
Telnet and SSH access to Nortel SNAS 4050 devices 
(see 

adm

Accesses the Administrative Applications menu, in 
order to set the CLI timeout value; manage Telnet, 
SSH, SNMP, and SONMP access to Nortel SNAS 4050 
devices; enable SRS administration; generate SSH 
host keys; and configure the system for RADIUS 
auditing and authentication of system users (see 

user

Accesses the User menu, in order to manage users 
and passwords (see 

distrace

Permanently disables the 

 

and 

 

commands (see 

The 

 command is used to improve security. 

The only way to reverse this command is to do a boot 
install.

followed by: