Nortel Networks 4050 User Manual
626 Chapter 12 Configuring SNMP
320818-A
Configuring SNMP notification targets using the CLI
SNMP managers function as the notification targets for SNMP monitoring.
To configure notification targets, use the following command:
/cfg/sys/adm/snmp/target <target ID>
where
target ID
is a positive integer that uniquely identifies the notification
target in the cluster.
The Notification Target menu displays.
authpasswd <password>
Specifies the password for USM user authentication.
The password is required if the security level is set to
The password is required if the security level is set to
auth
or
priv
.
•
password
is a string that must be at least eight
characters long.
privproto des|aes
Specifies the protocol used for encryption. Valid options
are:
are:
•
des
•
aes
The default is
des
.
privpasswd <password>
Specifies the USM user’s individual encryption key. The
password is required if the security level is set to
password is required if the security level is set to
priv
.
•
password
is a string that must be at least eight
characters long.
del
Removes the USM user from the configuration.
/cfg/sys/adm/snmp/users <user ID>
followed by: