Telex NI-223 Plus User Manual

Page of 13
- 6 -                                                                                                                                 NI223Plus 
                                                                                                                      
 
listening consoles. Configuration of the ring multicast and port numbers must be unique and 
consistent with the IP-223 and any listening console. For console configurations, please refer to 
the specific User Manual for that product. After the iDen® Radio Mode has been set, the IP-223 
must be reset. 
 
Figure 2 shows the iDen® Radio Setup page. Each line in the “Type” column is a drop down 
menu that allows selection of the line as a Direct Connect, Group Call, Emergency Group Call or 
Alert Call. The “iDen Number” column holds the iDen® Radio Direct Connect and Group 
numbers. Other options are selected as required by the installation. 
 
The Call Type and iDen Number placed in these fields will be associated with a console 
Function Tone. When a Console changes to that Function Tone and transmits, that Direct 
Connect or Group number will be sent to the iDen® Radio and, if available, a connection will be 
made. If using the iDen® Radio interface to make a phone call, the multicasts are unused, as a 
TCP/IP socket connection is made in the same manner as Phone Mode. 
 
 
 
Figure 2 iDen® Radio Setup Page