EMC QLA22xx User Manual
3
3-6
Configuring an EMC Boot Device
5. From the Configuration Settings menu, select Host Adapter
Settings
and press
ENTER
.
6. From the Host Adapter Settings menu, select Host Adapter
BIOS
and press
ENTER
to enable it if it is not already enabled.
Refer to EMC HBA Settings on page 2-8 for a table of EMC-configured
NVRAM settings.
NVRAM settings.
7. Press
ESC
to exit the Configuration Settings menu.
8. From the Configuration Settings menu, select Selectable Boot
Settings
and press
ENTER
.
9. From the Selectable Boot Settings menu, select Selectable Boot
Device
and press
ENTER
to enable it if it is not already enabled.
10. Select Current Boot Node Name and press
ENTER
.
The adapter scans for attached storage devices, and displays them
on the screen.
on the screen.
11. Choose the storage array port from which you wish to boot. Its
entry will be similar to the following:
Select your boot device and press
ENTER
.
A list of LUNs will appear in a new window. Select the LUN from
which you wish to boot and press
which you wish to boot and press
ENTER
.
12. Press
ESC
at the Selectable Boot Settings menu to return to the
Configuration Settings
menu.
13. Press
ESC
at the Configuration Settings menu to return to the
Fast!UTIL
Options menu.
Select Save Changes and press
ENTER
.
14. Press
ESC
to exit
Fast!UTIL
.
15. Reboot the host.
ID
VENDOR
PRODUCT
REV
NODE NAME
Port ID
12
EMC
SYMMETRIX
5566
50060482BFD06C02
0000E4