Manualsbrain.com
  1. Manuals
  2. Brands
  3. EMC
  4. QLA22xx
  5. User Manual

EMC QLA22xx User Manual

Download
Page of 78
3
3-8
Configuring an EMC Boot Device
7. Some servers use SCSI CD-ROM drives. If your server has a SCSI 
CD-ROM, repeat steps 5 and 6 to select the driver for the SCSI 
controller. If your controller is not on the list, obtain the driver on 
diskette from the vendor.
8. If you want to specify drivers for other devices installed in your 
system, do so; otherwise press 
ENTER 
at the Additional Devices 
screen to continue with Windows installation.
9. After completing Windows installation, reinstall the QLogic 
Windows 2000
The HP ProLiant BL20p G2 Windows 2000 Installation procedure is described 
under HP ProLiant BL20p G2 Windows 2000 Installation on page 3-9. 
1. Boot the installation CD-ROM. (On some servers, it might be 
necessary to use the Windows 2000 installation diskettes to start 
the installation procedure.)
When the installer starts, a message appears at the bottom of the 
screen, prompting you to press 
F6
 to load any other third-party 
drivers.
Press 
F6
.
2. After a few moments, the installer stops to let you add additional 
devices. A screen message will tell you that the setup program 
cannot determine the type of one or more mass storage devices. 
From this point, press S to specify additional devices.
3. Insert the QLogic driver diskette into the drive and press 
ENTER
. 
4. Select the model adapter that you have installed from the list that 
appears. Be sure to choose the correct model series for the HBA 
you have installed (QLA2300, for example) and press 
ENTER
.
The driver loads and you are brought back to the Additional 
Devices 
screen.
5. If you want to specify drivers for other devices installed in your 
system, do so; otherwise press 
ENTER 
at the Additional Devices 
screen to continue with Windows installation.
6. After completing Windows installation, reinstall the QLogic