X-Micro Tech. IEEE 802.11b User Manual
USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER
Version: 2.6
12
Beacon Interval
Set the Beacon Interval, value can be written between 20
and 1024 ms.
Refer to 4.12 What is Beacon Interval?
and 1024 ms.
Refer to 4.12 What is Beacon Interval?
Data Rate
Select the transmission data rate from pull-down menu.
Data rate can be auto-select, 11M, 5.5M, 2M or 1Mbps.
Data rate can be auto-select, 11M, 5.5M, 2M or 1Mbps.
Preamble Type
Click to select the Long Preamble or Short Preamble
support on the wireless data packet transmission.
Refer to 4.13 What is Preamble Type?
support on the wireless data packet transmission.
Refer to 4.13 What is Preamble Type?
Broadcast SSID
Click to enable or disable the SSID broadcast function.
Refer to 4.14 What is SSID Broadcast?
Refer to 4.14 What is SSID Broadcast?
IAPP
Click to enable or disable the IAPP function.
Refer to4.19 What is Inter-Access Point Protocol(IAPP)?
Refer to4.19 What is Inter-Access Point Protocol(IAPP)?
Apply Changes
Click the Apply Changes button to complete the new
configuration setting.
configuration setting.
Reset Click
the
Reset button to abort change and recover the
previous configuration setting.
3.3.4 Wireless Security Setup
This page allows you setup the wireless security. Turn on WEP or WPA by using
encryption keys could prevent any unauthorized access to your wireless network.
encryption keys could prevent any unauthorized access to your wireless network.
Screen snapshot – Wireless Security Setup