RAD Data comm E1 User Manual
Chapter 2 Installation and Setup
FOM-E1/T1 Installation and Operation Manual
2-6
Installation and Setup
Connecting AC Power
AC power should be supplied to FOM-E1/T1 through the 1.5m (5 ft) standard
power cable terminated by a standard 3-prong plug. The cable is provided with
the unit.
power cable terminated by a standard 3-prong plug. The cable is provided with
the unit.
To connect AC power:
1. Connect the power cable to the power connector on the FOM-E1/T1 rear
1. Connect the power cable to the power connector on the FOM-E1/T1 rear
panel.
2. Connect the power cable to the mains outlet.
The unit will be turned on automatically upon connection to the mains.
Connecting DC Power
To connect DC power:
• Refer to DC power supply connection supplement.
• Refer to DC power supply connection supplement.