Promise Technology 4600 User Manual

SsuperSwap 4100 User Manual

22

To replace a fan on the SuperSwap 4600, do the following:

1.

Power down the PC.

2.

Remove the SuperSwap enclosure from the PC chassis.

3.

Remove the two mounting screws on the fan.

4.

Pull the fan from the two mounting pins and the wire away from the bracket.

Do not bend the bracket.

5.

Unplug the power connector.

6.

Plug the power connector of the new fan.

7.

Lay the wire through the bracket and place the fan onto the two mounting 
pins.

8.

Install the two mounting screws.

9.

Reinstall the SuperSwap enclosure into the PC chassis.

10. Power up the PC and check fan function.

Mounting Screw

Wire Bracket

Power Connector

Mounting Pin

Fan