Promise Technology J610s User Manual
Chapter 3: Management
43
0238
500000E01212F582
CN2
0287
500000E0120B26B2
CN2
0365
5000155FFFC0223E
CN2
0462
500000E0114F18F2
CN2
0468
500000E01205B472
CN2
0542
500000E01122C5B2
CN2
0624
500000E0114E4A32
CN2
0639
500000E0114D8E32
CN2
0700
500000E0120B2A62
CN2
0721
500000E0114DE7A2
CN2
0751
500000E0114E5EA2
CN2
0764
500000E0120B28F2
CN2
0765
500000E0114C2342
CN2
0977
500000E0120A2472
CN2
1023
5000155FFFC02408
CN2
The route command displays SAS addresses that are attached to the SAS ports
of the J610s or J310s unit. Three items are reported:
•
of the J610s or J310s unit. Three items are reported:
•
Entry# – Arbitrary numbers, listed in sequence
•
SAS Address – Of the disk drive or other component
•
CnID – External SAS port connector number 1 or 2
The device in this example is connected to a J610s unit through connector CN2.
See page 21 for a diagram of connectors on the I/O module.
See page 21 for a diagram of connectors on the I/O module.
Route Troubleshooting
If your system returns:
No SAS Routing Entry Exists
...it indicates that no downstream devices are found.
Uptime Command
The uptime command informs you of the elapsed period of time since the J610s
or J310s unit was powered on.
or J310s unit was powered on.
To display uptime:
cli>uptime
The system returns:
System has been running 1 day 9 hours 46 minutes 36 seconds