Grandstream Networks HandyTone-496 User Manual
HandyTone-496 User Manual
Grandstream Networks, Inc
.
19
WAN port
0
LAN IP
LAN port
0
Protocol
UDP Only
WAN port
0
LAN IP
LAN port
0
Protocol
UDP Only
WAN port
0
LAN IP
LAN port
0
Protocol
UDP Only
WAN port
0
LAN IP
LAN port
0
Protocol
UDP Only
WAN port
0
LAN IP
LAN port
0
Protocol
UDP Only
Update
Cancel
Reboot
All Rights Reserved Grandstream Networks, Inc. 2005
End User
Password
Password
This contains the password to access the Web Configuration Menu. This
field is case sensitive.
field is case sensitive.
IP Address
There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the Flash memory.) The
HandyTone ATA will acquire its IP address from the first DHCP server it
discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to be set. The
HandyTone will attempt to establish a PPPoE session if any of the PPPoE
fields is set.
- If Static IP mode is enabled, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are reset to zero by default.
- If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the Flash memory.) The
HandyTone ATA will acquire its IP address from the first DHCP server it
discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to be set. The
HandyTone will attempt to establish a PPPoE session if any of the PPPoE
fields is set.
- If Static IP mode is enabled, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are reset to zero by default.
Time Zone
This parameter controls how the displayed date/time will be adjusted
according to the specified time zone.
according to the specified time zone.
Device Mode
To use the device as a router or a bridge.
Cloned WAN MAC
Address:
Address:
Allow the user to set a specific MAC address. Set in Hex format
LAN Subnet Mask
Sets the LAN subnet mask. Default value is 255.255.255.0
Daylight Savings Time This parameter controls whether the displayed time will be daylight savings
time or not. If set to “Yes”, the displayed time will be 1 hour ahead of
normal time.
normal time.
LAN DHCP Base IP:
Base IP for the LAN port which functions as a Gateway for the subnet.
Default value is 192.168.2.1
Default value is 192.168.2.1