Grandstream Networks HandyTone-496 User Manual

20 

Value is set in units of hours. Default value is 120hr (5 Days.) The time IP 
address are assigned to the LAN clients 

Forward all WAN IP traffic to a specific IP address if no matching port is 
used by HandyTone-496 itself or in the defined port forwarding. 

Allow users to forward a matching (TCP/UDP) port to a specific LAN IP 
address with a specific (TCP/UDP) port. 

 
 
In addition to the Basic Settings configuration page, end users also have access to the device Status 
page. The following is a snap shot of the device Status page.  Details will be explained next. 
 
 

 

STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT1  FXS PORT2 

MAC Address:   00.0B.82.03.C8.AF  

WAN IP Address:   192.168.1.187 

Product Model:   HT496  

Software Version:   Program-- 1.0.3.18    Bootloader-- 1.0.8.9    HTML-- 1.0.3.18    VOC-- 1.0.0.10 

System Up Time:   2 day(s) 0 hour(s) 9 minute(s)  

Registered:   Yes  

PPPoE Link Up:   disabled  

NAT:   detected NAT type is full cone  

  

  

 

All Rights Reserved Grandstream Networks, Inc. 2005

 

 

 
 
 

The device ID, in HEX format.  This is a very important ID for ISP 
troubleshooting. 

This field shows WAN port IP address. 

This field contains the product model info. 

Program: This is the main software release, its number is always used for 
firmware upgrade. 
Bootloader: This is normally not changed. 
HTML:   This is the web user interface, normally not changed. 
VOC:   This is the codec program, normally not changed.