ZyXEL Communications P-661H Series User Manual

 Chapter 16 Remote Management Configuration

P-661H/HW Series User’s Guide

The following table describes the labels in this screen.

You can use Telnet to access the ZyXEL Device’s command line interface. Specify which 
interfaces allow Telnet access and from which IP address the access can come.

Click Advanced > Remote MGMT > Telnet tab to display the screen as shown. Use this 
screen to specify which interfaces allow Telnet access and from which IP address the access 
can come.

Figure 126   Remote Management: Telnet

Table 98   Remote Management: WWW

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Apply

Click Apply to save your settings back to the ZyXEL Device. 

Cancel

Click Cancel to begin configuring this screen afresh.