ZyXEL Communications P-661H Series User Manual

Chapter 16 Remote Management Configuration

P-661H/HW Series User’s Guide

The following table describes the labels in this screen.

You can use FTP (File Transfer Protocol) to upload and download the ZyXEL Device’s 
firmware and configuration files. To use this feature, your computer must have an FTP client.
To change your ZyXEL Device’s FTP settings, click Advanced > Remote MGMT > FTP 
tab. The screen appears as shown. Use this screen to specify which interfaces allow FTP 
access and from which IP address the access can come. 

Figure 127   Remote Management: FTP

The following table describes the labels in this screen.

Table 99   Remote Management: Telnet

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secured Client 

IP

A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Cancel

Click Cancel to begin configuring this screen afresh.

Table 100   Remote Management: FTP

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.