ZyXEL Communications P-661H Series User Manual

Chapter 2 Introducing the Web Configurator

P-661H/HW Series User’s Guide

Default 

Gateway

This is the IP address of the default gateway, if applicable. 

VPI/VCI

This is the Virtual Path Identifier and Virtual Channel Identifier that you entered in 

the Wizard or WAN screen.

LAN Information

IP Address

This is the LAN port IP address.

IP Subnet Mask This is the LAN port IP subnet mask. 

DHCP

This is the WAN port DHCP role - Server, Relay or None. 

WLAN Information (Wireless devices only)

SSID

This is the descriptive name used to identify the ZyXEL Device in the wireless 

LAN.

Channel

This is the channel number used by the ZyXEL Device now.

Security

This displays the status of data encryption on the ZyXEL Device.

Security
(not available if you entered the user password)

Firewall

This displays whether or not the ZyXEL Device’s firewall is activated.

Content Filter

This displays whether or not the ZyXEL Device’s content filtering is activated.

System Status

System Uptime

This is the total time the ZyXEL Device has been on.

Current Date/

Time

This field displays your ZyXEL Device’s present

 

date and time.

System Mode

This displays whether the ZyXEL Device is functioning as a router or a bridge.

CPU Usage

This number shows how many kilobytes of the heap memory the ZyXEL Device 

is using. Heap memory refers to the memory that is not used by ZyNOS (ZyXEL 

Network Operating System) and is thus available for running processes like NAT, 

VPN and the firewall.
The bar displays what percent of the ZyXEL Device's heap memory is in use. The 

bar turns from blue to red when the maximum is being approached.

Memory Usage

This number shows the ZyXEL Device's total heap memory (in kilobytes). 
The bar displays what percent of the ZyXEL Device's heap memory is in use. The 

bar turns from blue to red when the maximum is being approached.

Interface Status

Interface

This displays the ZyXEL Device port types.

Status

This field displays Down (line is down), Up (line is up or connected) if you're 

using Ethernet encapsulation and Down (line is down), Up (line is up or 

connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop 

(dropping a call) if you're using PPPoE encapsulation.
For the WLAN port, it displays Active when WLAN is enabled or Inactive when 

WLAN is disabled.

Table 4   Status Screen