ZyXEL Communications P-661H Series User Manual

 Chapter 2 Introducing the Web Configurator

P-661H/HW Series User’s Guide

Click the Any IP Table hyperlink in the Status screen. The Any IP table shows current read-
only information (including the IP address and the MAC address) of all network devices that 
use the Any IP feature to communicate with the ZyXEL Device.

Figure 11   Status: Any IP Table

The following table describes the labels in this screen.

Rate

For the LAN ports, this displays the port speed and duplex setting. Ethernet port 

connections can be in half-duplex or full-duplex mode. Full-duplex refers to a 

device's ability to send and receive simultaneously, while half-duplex indicates 

that traffic can flow in only one direction at a time. The Ethernet port must use the 

same speed or duplex mode setting as the peer Ethernet port in order to connect. 

Simultaneous transmissions over the same port (Full-duplex) essentially double 

the bandwidth.
For the WAN port, it displays the downstream and upstream transmission rate.
For the WLAN port, it displays the transmission rate when WLAN is enabled or N/

A when WLAN is disabled.

Summary
(not available if you entered the user password)

Any IP Table

Use this screen to view a list of IP addresses and MAC addresses of computers, 

which are not in the same subnet as the ZyXEL Device.

VPN Status

Use this screen to view the status of any VPN tunnels the ZyXEL Device has 

negotiated.

Bandwidth 

Status

Use this screen to view the ZyXEL Device’s bandwidth usage and allotments.

Packet 

Statistics

Use this screen to view port status and packet specific statistics.

WLAN Status 

(wireless 

devices only)

This screen displays the MAC address(es) of the wireless stations that are 

currently associating with the ZyXEL Device. 

Table 4   Status Screen

Table 5   Status: Any IP Table

# 

This is the index number of the host computer. 

IP Address

This field displays the IP address of the network device.