ZyXEL Communications P-660R-T Series User Manual

P-660R-T Series User’s Guide

149 

Chapter 18 Remote Node Configuration

Figure 77   Menu 11.5 Remote Node Filter (PPPoA or PPPoE Encapsulation) 

         Menu 11.5 - Remote Node Filter
    Input Filter Sets:
      protocol filters= 1, 5, 9, 12
        device filters=
    Output Filter Sets:
      protocol filters=
        device filters=
    Call Filter Sets:
      protocol filters=
        device filters=

     Enter here to CONFIRM or ESC to CANCEL:

In the web configurator, open the Security screen as shown next. Select the predefined filter 
rules and click Apply.

Figure 78   Internet Security

Once you apply the filter rules in the web configurator, filter sets 11 and 12 are automatically 
applied in the protocol filters field under Input Filter Sets in SMT menu 11.5.

Note: SMT input protocol filter set numbers that were previously applied are erased 

after you apply the Internet Security filter rules in the web configurator. To 
reapply them or apply new filter sets, you need to enter the filter set numbers 
again along with filter sets 11 and 12. For example, to apply filter sets 1 and 2, 
you enter "1, 2, 11, 12". 

When you apply filter rules using the web configurator, filter sets 11 and 12 are automatically 
generated in SMT menu 21. This feature is not available on all models.