ZyXEL Communications P-660R-T Series User Manual

P-660R-T Series User’s Guide

Appendix F Log Descriptions

290

 

Table 103   CDR Logs 

board%d line%d channel%d, 
call%d,%s C01 Outgoing Call 
dev=%x ch=%x%s

The router received the setup requirements for a call. “call” is 

the reference (count) number of the call. “dev” is the device 

type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP). 

"channel" or “ch” is the call channel ID.For example,"board 0 

line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 

"Means the router has dialed to the PPPoE server 3 times.

board%d line%d channel%d, 
call%d,%s C02 OutCall 
Connected%d%s

The PPPoE, PPTP or dial-up call is connected.

board%d line%d channel%d, 
call%d,%s C02 Call Terminated

The PPPoE, PPTP or dial-up call was disconnected.

 

Table 104   PPP Logs 

ppp:LCP Starting

The PPP connection’s Link Control Protocol stage has started.

ppp:LCP Opening

The PPP connection’s Link Control Protocol stage is opening.

ppp:CHAP Opening

The PPP connection’s Challenge Handshake Authentication Protocol stage is 

opening.

ppp:IPCP Starting The PPP connection’s Internet Protocol Control Protocol stage is starting.

ppp:IPCP Opening

The PPP connection’s Internet Protocol Control Protocol stage is opening.

ppp:LCP Closing

The PPP connection’s Link Control Protocol stage is closing.

ppp:IPCP Closing

The PPP connection’s Internet Protocol Control Protocol stage is closing.

 

Table 105   ICMP Notes 

0

Echo Reply

0

Echo reply message

3

Destination Unreachable

0

Net unreachable

1

Host unreachable

2

Protocol unreachable

3

Port unreachable

4

A packet that needed fragmentation was dropped because it was set to Don't 

Fragment (DF)

5

Source route failed