ZyXEL Communications P-870HW-I User Manual
P-870HW-I1 User’s Guide
Chapter 26 Remote Node Setup
269
C
H A P T E R
26
Remote Node Setup
Use this menu to set up your Internet connection, input and output filter sets for the WAN port,
advanced features for the WAN port, or a backup gateway.
advanced features for the WAN port, or a backup gateway.
26.1 Remote Node Profile
Use this menu to set up your Internet connection. See
for background information. To open this menu, enter 11 in the main menu.
Figure 165 Menu 11.1: Remote Node Profile
The following table describes the labels in this menu.
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Active= Yes
Encapsulation= PPPoE Edit IP= No
Telco Option:
Service Name= Allocated Budget(min)= 0
Outgoing: Period(hr)= 0
My Login= hello Schedules=
My Password= ******** Nailed-Up Connection= No
Retype to Confirm= ********
Authen= CHAP/PAP
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Telco Option:
Service Name= Allocated Budget(min)= 0
Outgoing: Period(hr)= 0
My Login= hello Schedules=
My Password= ******** Nailed-Up Connection= No
Retype to Confirm= ********
Authen= CHAP/PAP
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
Table 123 Menu 11.1: Remote Node Profile
FIELD
DESCRIPTION
Rem Node Name
Enter the name of the ISP.
Active
Select whether or not you want to use this Internet connection.
Encapsulation
Select the type of encapsulation your ISP uses. If you change this setting, you
have to open menu 11.1.2 (Edit IP), update the settings, and save them before
you can save the settings in this menu.
Service Name
Enter the service name provided by your ISP. Leave this field blank if your ISP
did not provide one.