ZyXEL Communications WAP3205 User Manual

Chapter 11 LAN

WAP3205 User’s Guide

Use this screen to have the WAP3205 apply IP alias to create LAN subnets. Click 
LAN > IP Alias.

Figure 65   Network > LAN > IP Alias 

The following table describes the labels in this screen.

Gateway IP 
Address

Enter a gateway IP address (if your ISP or network administrator gave 
you one) in this field.

DNS Assignment
First DNS Server

Second DNS 
Server

Select From ISP if your ISP or router to which the WAP3205 connects 
dynamically assigns DNS server information (and the WAP3205's WAN 
IP address). The field to the right displays the (read-only) DNS server 
IP address that the ISP assigns. 

Select User-Defined if you have the IP address of a DNS server. Enter 
the DNS server's IP address in the field to the right. 

Select None if you do not want to configure DNS servers. If you do not 
configure a DNS server, you must know the IP address of a computer 
in order to access it.

Apply

Click Apply to save your changes back to the WAP3205.

Reset

Click Reset to begin configuring this screen afresh.

Table 42   Network > LAN > IP

Table 43   Network > LAN > IP Alias

IP Alias

Check this to enable IP alias.

IP Address

Type the IP alias address of your WAP3205 in dotted decimal notation.

IP Subnet Mask

The subnet mask specifies the network number portion of an IP 
address. Your WAP3205 will automatically calculate the subnet mask 
based on the IP address that you assign. Unless you are implementing 
subnetting, use the subnet mask computed by the WAP3205.

Apply

Click Apply to save your changes back to the WAP3205.

Reset

Click Reset to begin configuring this screen afresh.