ZyXEL Communications WAP3205 Manuale Utente
Chapter 11 LAN
WAP3205 User’s Guide
104
11.5 IP Alias Screen
Use this screen to have the WAP3205 apply IP alias to create LAN subnets. Click
LAN > IP Alias.
LAN > IP Alias.
Figure 65 Network > LAN > IP Alias
The following table describes the labels in this screen.
Gateway IP
Address
Address
Enter a gateway IP address (if your ISP or network administrator gave
you one) in this field.
you one) in this field.
DNS Assignment
First DNS Server
First DNS Server
Second DNS
Server
Server
Select From ISP if your ISP or router to which the WAP3205 connects
dynamically assigns DNS server information (and the WAP3205's WAN
IP address). The field to the right displays the (read-only) DNS server
IP address that the ISP assigns.
dynamically assigns DNS server information (and the WAP3205's WAN
IP address). The field to the right displays the (read-only) DNS server
IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter
the DNS server's IP address in the field to the right.
the DNS server's IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a computer
in order to access it.
configure a DNS server, you must know the IP address of a computer
in order to access it.
Apply
Click Apply to save your changes back to the WAP3205.
Reset
Click Reset to begin configuring this screen afresh.
Table 42 Network > LAN > IP
LABEL
DESCRIPTION
Table 43 Network > LAN > IP Alias
LABEL
DESCRIPTION
IP Alias
Check this to enable IP alias.
IP Address
Type the IP alias address of your WAP3205 in dotted decimal notation.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP
address. Your WAP3205 will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the WAP3205.
address. Your WAP3205 will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the WAP3205.
Apply
Click Apply to save your changes back to the WAP3205.
Reset
Click Reset to begin configuring this screen afresh.