ZyXEL Communications WAP3205 User Manual
Chapter 12 Maintenance
WAP3205 User’s Guide
112
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen
to upload firmware to your WAP3205.
to upload firmware to your WAP3205.
Figure 69 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Note: Do not turn off the WAP3205 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before
logging into the WAP3205 again.
logging into the WAP3205 again.
The WAP3205 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 70 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status screen.
Status screen.
If the upload was not successful, an error message appears. Click Return to go
back to the Firmware Upgrade screen.
back to the Firmware Upgrade screen.
Table 47 Maintenance > Firmware Upgrade
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click
Browse... to find it.
Browse... to find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload them.
you must decompress compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to
two minutes.
two minutes.