ZyXEL Communications WAP3205 User Manual
Chapter 12 Maintenance
WAP3205 User’s Guide
115
12.9 System Operation Mode Overview
The Sys OP Mode (System Operation Mode) function lets you configure your
WAP3205 as an access point, wireless client or both at the same time. You can
choose between Access Point Mode, Client Mode and Universal Repeater
Mode depending on your network topology and the features you require from
your device.
WAP3205 as an access point, wireless client or both at the same time. You can
choose between Access Point Mode, Client Mode and Universal Repeater
Mode depending on your network topology and the features you require from
your device.
The following describes the device modes available in your WAP3205.
Access Point
An access point enabled all ethernet ports to be bridged together and be in the
same subnet. To connect to the Internet, another device, such as a router, is
required.
same subnet. To connect to the Internet, another device, such as a router, is
required.
Figure 73 Access Point Mode
Client
WAP3205 in client mode connects to an existing access point wirelessly. It acts
just like a wireless client in notebooks/computers.
just like a wireless client in notebooks/computers.
Figure 74 Client Mode
Access Point
Wireless
Client
Client