ZyXEL Communications PLA-407 User Manual
PLA-407 User’s Guide
31
C
H A P T E R
4
The ENCRYPT Button
4.1 ENCRYPT Button Overview
The ENCRYPT button allows you to set up a secure Powerline connection with
other HomePlug AV compliant Powerline devices which also support the ENCRYPT
feature. No other setting changes are required to connect.
other HomePlug AV compliant Powerline devices which also support the ENCRYPT
feature. No other setting changes are required to connect.
You can use the ENCRYPT button to:
• set up a new Powerline network
• separate an existing Powerline network into multiple networks
• separate an existing Powerline network into multiple networks
4.2 Set Up a HomePlug AV Network with
ENCRYPT
ENCRYPT
You can connect a number of devices on a Powerline network, but you can use the
ENCRYPT button on only two devices at a time.
ENCRYPT button on only two devices at a time.
1
Place a Powerline device close to another Powerline device so you have time to set
up each one. After you set up the first Powerline device, you have 60 seconds to
set up the second Powerline device.
up each one. After you set up the first Powerline device, you have 60 seconds to
set up the second Powerline device.
2
You can disconnect them from your computer or modem (or other networking
equipment) if you need to move them close to each other, but the Powerline
devices need to be plugged into power outlets.
equipment) if you need to move them close to each other, but the Powerline
devices need to be plugged into power outlets.
Note: Because your PLA-407 goes into Low Power mode, it must be connected to a
networking equipment for the ENCRYPT button to work. Refer to
3
Press the ENCRYPT button on your first Powerline device for more than 10
seconds until the power (
seconds until the power (
) light flashes. This resets the network name to a
random value and removes your device from any network it may belong to.