ZyXEL Communications ZyWALL 100 User Manual
ZyWALL 100
3
LABEL DESCRIPTION
WIRELESS LAN
Do not insert or remove a card with the ZyWALL turned on.
Turn off the ZyWALL before inserting or removing an 11 Mbps 802.11b-compliant wireless LAN
PCMCIA card (to avoid damage).
PCMCIA card (to avoid damage).
Slide the 64-pin connector end of the PCMCIA wireless LAN card into the slot as shown next.
Do not force, bend or twist the wireless LAN card.
The Front Panel LEDs
The PWR LED turns on when you connect the power. The SYS LED blinks while performing system testing
and then stays on if the testing is successful. The CON/AUX, LAN, WAN and WLAN LEDs turn on if they
are properly connected. Refer to the following table for more detailed LED descriptions.
and then stays on if the testing is successful. The CON/AUX, LAN, WAN and WLAN LEDs turn on if they
are properly connected. Refer to the following table for more detailed LED descriptions.