ZyXEL Communications 2 Plus User Manual

Chapter 25 Logs Screens

ZyWALL 2 Plus User’s Guide

"

Computers take turns using dynamically assigned LAN, DMZ or WLAN IP 
addresses. The ZyWALL continues recording the bytes sent to or from a LAN, 
DMZ or WLAN IP address when it is assigned to a different computer. 

Figure 277   LOGS > Reports: Host IP Address Example

The following table describes the labels in this screen.  

In the Reports screen, select Protocol/Port from the Report Type drop-down list box to have 
the ZyWALL record and display which protocols or service ports have been used the most and 
the amount of traffic for the most used protocols or service ports.

Table 137   LOGS > Reports: Host IP Address

IP Address

This column lists the LAN, DMZ or WLAN IP addresses to and/or from which the 

most traffic has been sent. The LAN, DMZ or WLAN IP addresses are listed in 

descending order with the LAN, DMZ or WLAN IP address to and/or from which the 

most traffic was sent listed first.

Direction

This field displays Incoming to denote traffic that is coming in from the WAN to the 

LAN, DMZ or WLAN. This field displays Outgoing to denote traffic that is going out 

from the LAN, DMZ or WLAN to the WAN.

Amount

This column displays how much traffic has gone to and from the listed LAN, DMZ or 

WLAN IP addresses. The measurement unit shown (bytes, Kbytes, Mbytes or 

Gbytes) varies with the amount of traffic sent to and from the LAN, DMZ or WLAN IP 

address. The count starts over at 0 if the total traffic sent to and from a LAN, DMZ or 

WLAN IP passes the bytes count limit (see