ZyXEL Communications 2 Plus User Manual

Chapter 25 Logs Screens

ZyWALL 2 Plus User’s Guide

The following table lists detailed specifications on the reports feature.

This section provides descriptions of example log messages. 

Table 139   Report Specifications

Number of web 

sites/protocols 

or ports/IP 

addresses 

listed:

20

Hit count limit:

Up to 2

32

 hits can be counted per web site. The count starts over at 0 if it passes 

four billion.

Bytes count 

limit:

Up to 2

64

 bytes can be counted per protocol/port or LAN IP address. The count 

starts over at 0 if it passes 2

64

 bytes.

Table 140   System Maintenance Logs

Time calibration is 
successful

The router has adjusted its time based on information from 

the time server.

Time calibration failed

The router failed to get information from the time server.

WAN interface gets IP: %s

A WAN interface got a new IP address from the DHCP, 

PPPoE, PPTP or dial-up server.

DHCP client IP expired

A DHCP client's IP address has expired.

DHCP server assigns %s

The DHCP server assigned an IP address to a client.

Successful SMT login

Someone has logged on to the router's SMT interface.

SMT login failed

Someone has failed to log on to the router's SMT interface.

Successful WEB login

Someone has logged on to the router's web configurator 

interface.

WEB login failed

Someone has failed to log on to the router's web configurator 

interface.

Successful TELNET login

Someone has logged on to the router via telnet.

TELNET login failed

Someone has failed to log on to the router via telnet.

Successful FTP login

Someone has logged on to the router via FTP.

FTP login failed

Someone has failed to log on to the router via FTP.

NAT Session Table is Full!

The maximum number of NAT session table entries has been 

exceeded and the table is full.

Starting Connectivity 
Monitor

Starting Connectivity Monitor.

Time initialized by Daytime 
Server

The router got the time and date from the Daytime server.

Time initialized by Time 
server

The router got the time and date from the time server.