ZyXEL Communications 4528F User Manual

Chapter 42 VRRP

XGS-4526/4528F/4728F User’s Guide

Note: Routing domains with the same VLAN ID are not displayed in the table 

indicated. 

Figure 195   IP Application > VRRP Configuration > IP Interface 

The following table describes the labels in this screen.

Table 136   IP Application > VRRP Configuration > IP Interface 

Index

This field displays the index number of an entry.

Network

This field displays the IP address and number of subnet mask bit of an IP 
domain. 

Authenticati
on

Select None to disable authentication. This is the default setting. 

Select Simple to use a simple password to authenticate VRRP packet 
exchanges on this interface.

Key

When you select Simple in the Authentication field, enter a password 
key (up to eight printable ASCII character long) in this field. 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click Cancel to discard all changes made in this table.