Adtran MX2800 M13 User Manual

MX2800 M13 Multiplexer User Manual

Configuration, Section 3

61200290L1-1G

    3-33

Set the amount of time the terminal or Telnet session remains inactive before automatically closing the 
session, requiring the user to log in again. Options include the following:

• Disabled

• 1  min.

• 5  min.

• 15 min.

• 60 min.

• 1 day.

Enable or disable the 

IP Security

 option. If IP Security is set to Enabled, the unit accepts management 

commands and Telnet sessions from the IP addresses entered into the 

IP Hosts

 fields.

Enter up to 16 IP addresses of management stations from which the unit should accept management 
commands. These addresses are applicable only if IP Security is Enabled.

Enter date and time information. Enter the month, date, and year separated by forward slashes (02/23/04). 
Enter the time in military time separated by colons (13:15:25). 

The Miscellaneous option of the System management menu sets the fields and values for the

• Alarm Relay Configuration

• Equipment Identification

• Syslog Setup

• Auto Save

• Craft baud rate

This menu enables and disables audible and visible alarms for specific error conditions. See 

.