Adtran 1000R Series User Manual
Command Reference Guide
AS Path List Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1273
AS P
ATH
L
IST
C
OMMAND
S
ET
To activate the Autonomous System (AS) Path List Configuration mode, enter the ip as-path-list
command at the Global Configuration mode prompt. For example:
command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#ip as-class-list listname
(config-as-path-list)#
#configure terminal
(config)#ip as-class-list listname
(config-as-path-list)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
of this guide. For more information, refer to the sections listed below:
All other commands for this command set are described in this section in alphabetical order.