Cisco Systems AIRCAP3602ITK9 User Manual
17
Step 4
Align the module’s connector with the connector on the back of the access point and click the
module into place.
module into place.
Step 5
Screw down the thumb screws on the module.
Note
If the screws are not tightened, the module will not be recognized and may not operate
correctly. Make sure not to over-tighten, only hand-tighten the screws.
correctly. Make sure not to over-tighten, only hand-tighten the screws.
Step 6
Power up the access point. When the access point boots up, it will recognize the module.
3
45
38
0