Cisco Systems ONS 15600 User Manual
11-2
Cisco ONS 15600 Procedure Guide, R5.0
February 2008
Chapter 11 Change Card Settings
NTP-E157 Provision a Multirate PPM
NTP-E157 Provision a Multirate PPM
Step 1
Complete the
to log into an ONS 15600 on the network.
Step 2
Click the Alarms tab:
a.
Verify that the alarm filter is not turned on. See the
as necessary.
b.
Verify that no unexplained conditions appear on the network. If unexplained conditions appear,
resolve them before continuing. Refer to the Cisco ONS 15600 SONET Troubleshooting Guide.
resolve them before continuing. Refer to the Cisco ONS 15600 SONET Troubleshooting Guide.
c.
Complete the
to export alarm and condition
information.
Step 3
In node view, double-click the ASAP card where you want to provision PPM settings.
Step 4
Click the Provisioning > Pluggable Port Modules tabs.
Step 5
In the Pluggable Port Modules pane, click Create. The Create PPM dialog box appears.
Step 6
In the Create PPM dialog box, complete the following:
•
PPM—Click the slot number where the SFP is installed from the drop-down list.
•
PPM Type—Click the number of ports supported by your SFP from the drop-down list. If only one
port is supported, PPM (1 port) is the only menu option.
port is supported, PPM (1 port) is the only menu option.
Step 7
Click OK. The newly created port appears on the Pluggable Port Modules pane. The row on the
Pluggable Port Modules pane turns light blue and the Actual Equipment Type column lists the equipment
name.
Pluggable Port Modules pane turns light blue and the Actual Equipment Type column lists the equipment
name.
Step 8
Verify that the PPM appears in the list on the Pluggable Port Modules pane. If it does not, repeat Steps
through
.
Step 9
Repeat the task to provision a second PPM.
Step 10
Click OK.
Step 11
Continue with the
to provision the
line rate.
Stop. You have completed this procedure.
Purpose
This procedure provisions a multirate pluggable port modules (PPMs) in
CTC.
CTC.
Tools/Equipment
None
Prerequisite Procedures
, as needed
Required/As Needed
Required
Onsite/Remote
Onsite or remote
Security Level
Provisioning or higher