Lucent Technologies 6000 User Manual
4-58
MAX 6000/3000 Network Configuration Guide
Configuring Individual WAN Connections
Configuring MP, MP+ and BACP connections
Configuring MP, MP+ and BACP connections
Stacking requires an endpoint discriminator. Every MP/MP+ call that comes to any member of
the stack is compared to all existing MP/MP+ calls in the MAX stack to determine whether it
is a member of an existing bundle. If the call belongs to an existing bundle, the unit that
answered and the bundle owner exchange information about the bundle. Furthermore, the unit
that answered the call forwards all incoming data packets over the Ethernet to the bundle
owner.
the stack is compared to all existing MP/MP+ calls in the MAX stack to determine whether it
is a member of an existing bundle. If the call belongs to an existing bundle, the unit that
answered and the bundle owner exchange information about the bundle. Furthermore, the unit
that answered the call forwards all incoming data packets over the Ethernet to the bundle
owner.
Outgoing data
To balance the load among all available WAN channels, outgoing data packets for the WAN
are assigned to available channels in a bundle on a rotating basis. If the unit assigns an
outgoing packet to a channel that is not local to the bundle owner, the bundle owner forwards
the packet over the Ethernet to the unit that owns the nonlocal channel.
are assigned to available channels in a bundle on a rotating basis. If the unit assigns an
outgoing packet to a channel that is not local to the bundle owner, the bundle owner forwards
the packet over the Ethernet to the unit that owns the nonlocal channel.
Real and stacked channels
For the purpose of this description, real channels are those channels that connect directly to the
MAX unit that owns the bundle. Stacked channels connect to a unit that transfers the data to or
from the unit that owns the bundle.
MAX unit that owns the bundle. Stacked channels connect to a unit that transfers the data to or
from the unit that owns the bundle.
For example, assume the initial call through an MP/MP+ bundle connects to MAX #1. This
connection is a real channel. Next, the second call of the bundle connects to MAX #2. This
connection is a stacked channel. MAX #1 is the bundle owner, and it manages the traffic for
both channels of the bundle. MAX #2 forwards any traffic from the WAN to MAX #1, for
distribution to the destination, as shown in Figure 4-5.
connection is a real channel. Next, the second call of the bundle connects to MAX #2. This
connection is a stacked channel. MAX #1 is the bundle owner, and it manages the traffic for
both channels of the bundle. MAX #2 forwards any traffic from the WAN to MAX #1, for
distribution to the destination, as shown in Figure 4-5.
Figure 4-5. Packet flow from the slave channel to the Ethernet
Note:
Figure 4-5 does not illustrate traffic from the master MAX unit. WAN traffic received
on the master channel by MAX #1 is forwarded directly to the destination.
Likewise, MAX #1 receives all Ethernet traffic destined for the bundle, and disperses the
packets between itself and MAX #2, as shown in Figure 4-6. MAX #1 forwards some of the
packets across the WAN through a real channel. MAX #2 sends the rest of them through a
stacked channel.
packets between itself and MAX #2, as shown in Figure 4-6. MAX #1 forwards some of the
packets across the WAN through a real channel. MAX #2 sends the rest of them through a
stacked channel.
A
Ethernet
MAX #2
(slave)
(slave)
MAX #1
(master)
(master)
3
2
1
WAN