Lucent Technologies 6000 User Manual

5-16

   Preliminary January 4, 2001   

MAX 6000/3000 Network Configuration Guide

Configuring Frame Relay
Configuring a DLCI logical interface

In the following example, the MAX has a connection to a Frame Relay switch that also 
supports IP routing, as shown in Figure 5-7:

The following set of parameters configures the Connection profile, assigning DLCI 100:

Ethernet

Connections

Active=Yes

Encaps=FR

IP options

LAN Adrs=10.11.12.3/24

Encaps options

FR Prof=fr-dce

DLCI=100

Telco options

Call Type=Nailed

Following is a comparable RADIUS profile:

permconn-max-1 Password="ascend", User-Service=Dialout-Framed-User

    User-Name="max-switch",

    Framed-Protocol=FR,

    Framed-Address=10.11.12.3,

    Framed-Netmask=255.255.255.0,

    Ascend-Route-IP=Route-IP-Yes,

    Ascend-FR-DLCI=100,

    Ascend-FR-Profile-Name="fr-dce"

When IP routing is enabled, the MAX creates a route for this destination. 

Administrators can choose to add static routes to other subnets or to enable RIP updates to or 
from the router across Frame Relay. The usual considerations for IP routing connections apply 
(see Chapter 9, “Configuring IP Routing.”)

Ascend-Backup (176)

Name of a backup Connection profile to the next hop (optional). 
See “Examples of backup interfaces for nailed Frame Relay links” 
on page 5-17.