Leviton 47611-GB4 User Manual
4. Use one of the four Performance Patch Cords to connect the computer’s Ethernet
port to the data connector marked “B”.
5. At the SMC, locate the Router port marked WAN. Use the second Performance
Patch Cord to connect this WAN port to the Category 5e Voice and Data Module
port marked “A”. This is the port linked back to the modem’s data connector.
port marked “A”. This is the port linked back to the modem’s data connector.
6. Use the third Performance Patch Cord to connect one of the Router ports (labeled
1-4) to the Category 5e Voice & Data Module port marked “B”. This is the port that is
linked back to the computer’s data connector.
linked back to the computer’s data connector.
NOTE: To connect up to three additional computers or peripherals, simply connect
the Router’s other numbered ports to Category 5e Voice & Data Module ports,
which in turn are cabled back to additional data connectors at the computer or
peripheral location.
which in turn are cabled back to additional data connectors at the computer or
peripheral location.
7. Reconnect the power to the modem, ensure your modem is connected to your
broadband service. (Phone service can be run through your Voice & Data Module,
as seen in Figure 2, page 5.)
as seen in Figure 2, page 5.)
8. Attach the power cord to the Router and plug it into an AC outlet, powering the
Router.
9. Restart your computer.
Configuring the Router:
1. Launch your web browser, and enter: http://192.168.0.1 into the URL field of the
browser window. This is the default IP address for the Router. This IP address
connects to the Router firmware, not the Internet.
connects to the Router firmware, not the Internet.
2. Once the Router firmware is contacted, you should see a prompt for a user name
and password. Leave the user name field blank and type “leviton” in lower case in the
password field. The password is case sensitive; do not include the quotation marks.
password field. The password is case sensitive; do not include the quotation marks.
3. Click “OK”.
4. Select the “Setup Wizard” on the left frame of page. You will be guided through a
4. Select the “Setup Wizard” on the left frame of page. You will be guided through a
series of questions to configure your Router.
NOTE: You will need your connection information from your ISP.
NOTE: If it’s necessary to return the Router to its factory default settings, press and
NOTE: If it’s necessary to return the Router to its factory default settings, press and
hold the “reset” button on the back of the module for six seconds.
If you need additional assistance, please call Leviton’s Technical Support at
1-800-824-3005.
1-800-824-3005.
DI-045-47611-05A
3
DI-045-47611-05A
6
Client Notes