Multi-Tech Systems GPRS (MTMMC-G) User Manual
Chapter 11 – Data Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
94
Select Mode +FCLASS
Description:
This command puts the product into a particular operating mode (data or fax).
Values:
<n>
0 Data
Syntax: Command
syntax: AT+FCLASS= <n>
Command
Possible responses
AT+FCLASS=?
Note: Test command
Note: Test command
+FCLASS: (0)
OK
Note: Fax class 2 not supported
OK
Note: Fax class 2 not supported
AT+FCLASS=?
Note: Test command
Note: Test command
+FCLASS: (0)
OK
OK
AT+FCLASS=0
Note: Data mode requested
Note: Data mode requested
OK
Note: Command valid
Note: Command valid
OK
Note: Command valid
AT+FCLASS?
Note: Current value
Note: Current value
+FCLASS:
OK
Note: Command valid
Note: Command valid
Service Reporting Control +CR
Description:
This command enables a more detailed type of service reporting in the case of incoming or outgoing
data calls. Before sending the CONNECT response to the application, the product will specify the type
of data connection that has been set up.
data calls. Before sending the CONNECT response to the application, the product will specify the type
of data connection that has been set up.
These report types are:
+CR:
ASYNC
For asynchronous transparent
+CR:
REL
ASYNC For asynchronous non-transparent
Values: <mode>
0 Disable extended reports
1 Enable extended reports
1 Enable extended reports
Syntax: Command
syntax:
AT+CR=<mode>
Command
Possible responses
AT+CR=0
Note: Extended reports disabled
Note: Extended reports disabled
OK
Note: Command valid
Note: Command valid
AT+CR=1
Note: Extended reports enabled
Note: Extended reports enabled
OK
Note: Command valid
Note: Command valid
AT+CR? +CR:
1
OK
AT+CR=? +CR:
(0,1)
OK