Multi-Tech Systems GPRS (MTMMC-G) User Manual

Chapter 11 – Data Commands

Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)

Cellular Result Codes +CRC

Description:

This command shows more detailed ring information for an incoming call (voice or data). Instead of the
string “RING”, an extended string is used to indicate which type of call is ringing (e.g. +CRING: VOICE).

These extended indications are:

+CRING: ASYNC

for asynchronous transparent

+CRING: REL ASYNC

for asynchronous non-transparent

+CRING: VOICE

for normal speech.

Values: <mode>

0 Disable extended reports
1 Enable extended reports

Syntax: Command

syntax: AT+CRC=<mode>

Command

Possible responses

AT+CRC=0
Note: Extended reports disabled

OK
Note: Command valid

AT+CRC=1
Note: Extended reports enabled

OK
Note: Command valid

AT+CRC? +CRC:

AT+CRC=? +CRC:

(0,1)

DTE-DCE Local Rate Reporting +ILRR

Description:

This parameter controls whether or not the extended-format “

+ILRR:<rate>” information text is

transmitted from the DCE to the DTE. The

<rate> reported represents the current (negotiated or

renegotiated) DTE-DCE rate.

If enabled, the intermediate result code is transmitted in an incoming or outgoing data call, after any
data compression report, and before any final result code (CONNECT).

Values: <value>

0 Disable local port rate report
1 Enable local port rate report

<rate> Can take the following values: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Kbps.

Syntax: Command

syntax:

AT+ILRR = <value>

Command

Possible responses

AT+ILRR=0
Note: Local port rate report disabled

OK
Note: Command valid

AT+ILRR=1
Note: Local port rate report enabled

OK
Note: Command valid

AT+ILRR? +ILRR:

AT+ILRR=? +ILRR:

(0,1)